{ "id": "dog-screen-door-12-x-14", "sku": "dog-screen-door-12-x-14", "title": "Ownpets Dog Screen Door 12 x 14 with Magnetic Flap", "slug": "dog-screen-door-12-x-14", "price": 71.99, "currency": "USD", "availability": "in_stock", "category": "pet-screen-doors", "category_label": "Pet Screen Doors", "tags": [], "colors": [], "materials": [], "dimensions": null, "weight": null, "images": [ "https://americanbudgetscreens.com/dropship-images/pet-screen-doors/dog-screen-door-12-x-14/main-dog-screen-door-12-x-14.jpg", "https://americanbudgetscreens.com/dropship-images/pet-screen-doors/dog-screen-door-12-x-14/dog-screen-door-12-x-14-10.jpg", "https://americanbudgetscreens.com/dropship-images/pet-screen-doors/dog-screen-door-12-x-14/dog-screen-door-12-x-14-2.jpg", "https://americanbudgetscreens.com/dropship-images/pet-screen-doors/dog-screen-door-12-x-14/dog-screen-door-12-x-14-3.jpg", "https://americanbudgetscreens.com/dropship-images/pet-screen-doors/dog-screen-door-12-x-14/dog-screen-door-12-x-14-4.jpg", "https://americanbudgetscreens.com/dropship-images/pet-screen-doors/dog-screen-door-12-x-14/dog-screen-door-12-x-14-5.jpg", "https://americanbudgetscreens.com/dropship-images/pet-screen-doors/dog-screen-door-12-x-14/dog-screen-door-12-x-14-6.jpg", "https://americanbudgetscreens.com/dropship-images/pet-screen-doors/dog-screen-door-12-x-14/dog-screen-door-12-x-14-7.jpg", "https://americanbudgetscreens.com/dropship-images/pet-screen-doors/dog-screen-door-12-x-14/dog-screen-door-12-x-14-8.jpg", "https://americanbudgetscreens.com/dropship-images/pet-screen-doors/dog-screen-door-12-x-14/dog-screen-door-12-x-14-9.jpg" ], "description_short": "A 12 x 14 inch pet screen door with a self-closing magnetic flap, dual-side locks and a tool-free fit on screens between 0.25 and 0.5 inches thick.", "description": "The problem with being the family doorman\n\nThere is a particular kind of tiredness that comes from opening the same door forty times a day. The dog wants out. Five minutes later the dog wants in. You are halfway through dinner, or on a call, or asleep, and there is a nose at the screen again.\n\nA pet screen door solves this in the plainest way possible. You cut an opening into a screen panel you already have, fit a framed flap into it, and your dog starts using their own door. After the first week you stop noticing it, which is the goal.\n\nWhat separates a good one from a bad one is not complicated. It comes down to how reliably the flap closes, how well the frame survives daily abuse, how it attaches to your particular screen, and whether you can shut it when you need to.\n\nHow a screen pet door works\n\nThe mechanics are simple. The door is a rigid frame in two halves. One half goes on the inside of the screen, the other on the outside, and they clamp together through the cut opening with screws. The flap hangs from hinges at the top and swings in both directions.\n\nThe closing mechanism is where products differ. Some use a spring, which snaps the flap shut with force and noise. This one uses magnets. The flap is drawn back against the frame by magnetic contact after each pass. It is quieter, which matters more than people expect, because a loud snapping door is the single most common reason a dog refuses to use one.\n\nMagnets also do the insect job well. The whole point of a screen is to keep bugs out, and a flap that sits ajar undoes that in about an hour on a warm evening. A self-closing flap returns to its seat every time without you checking it.\n\nThe locks are the other half of the design. There is one on each face of the door. Engage them and the flap is held shut. That gives you control at night, during storms, when a gate is open, or when the dog has already had enough mud for one day.\n\nWho this particular door suits\n\nThe 12 x 14 inch opening is the large size, and that is a real consideration rather than a marketing word. A door that is too small is the second most common reason a dog stops using one. They clip their shoulders, it becomes unpleasant, and they go back to standing at the screen.\n\nOwnpets rates this door for pets up to 80 pounds. That covers a wide range, from cats and small terriers through to labradors and similar builds. If you have a mixed household, one door can serve all of them, which is why people searching for the best large dog screen door often land on this size even when they also own a cat.\n\nBefore you commit, measure your dog. Stand them square and measure the width across the widest point of the shoulders, then the height at the withers. You want the opening comfortably wider than the shoulders and the flap top above the shoulder line. If both numbers sit well inside 12 by 14 inches, you are fine.\n\nChecking your screen before you order\n\nThis is the step people skip and then regret. Screen panels vary.\n\nMeasure the thickness of your screen panel. This door fits panels from 0.25 inches up to 0.5 inches thick, which covers most patio screens, sliding screen doors and hinged screen doors. Use a ruler on the edge of the frame rather than guessing.\n\nThen measure the flat mesh area. You need enough clear mesh to take a 12 x 14 inch opening plus frame margin around it, without running into the panel's edge rails or any cross-brace. On a narrow screen panel this is the constraint that catches people out.\n\nThe door works with metal, fiberglass and vinyl-coated screens. If your mesh is one of those three and the thickness is in range, you are good to proceed.\n\nFitting it without wrecking your screen\n\nInstallation is tool-free in the sense that no drilling into the door frame is needed. You will still want a pencil, a marker and a sharp blade or scissors for the mesh.\n\nStart by deciding on the height. Aim to mount the door around 6 to 9 inches off the floor. The idea is that your dog steps through rather than climbs or crouches. Watch them walk and set the bottom of the flap just below their chest line.\n\nUse the included template to mark the opening. Check the marks twice, then cut the mesh. Cut slightly inside your line rather than outside, because the frame covers the edge and a tight hole looks neater than a loose one.\n\nPress the two frame halves together through the opening and fit the screws. Do not overtighten plastic. Snug is enough. Then open and close the flap by hand a dozen times to check it sits flush and the magnets grab cleanly.\n\nIf you rent, the no-drill approach is the point. Only the mesh is altered. Re-meshing a screen panel is a cheap job if you move out and want to hand it back as you found it.\n\nTraining your dog to use it\n\nSome dogs walk through on the first attempt. Most need a little coaching, and the method that works best is the slow one.\n\nTape the flap fully open so the dog sees a clean hole with daylight on the other side. Stand outside, call them, reward them when they come through. Repeat until it is boring. Then tape the flap half open and repeat. Then let it hang free and guide it gently with your hand as they push.\n\nNever shove a dog through a flap. One bad experience with a pet door can take weeks to undo. Feeding them near it, leaving treats on the far side and keeping the whole thing low-key gets better results than force. For a nervous dog, the quieter magnetic closure is a real advantage over spring-loaded designs.\n\nKeeping it working\n\nMaintenance is genuinely light. Wipe the frame and flap down with a damp cloth and a little soapy water when it gets grubby, which on a door used by a muddy dog is more often than you would think.\n\nPay attention to the magnet contact area. Hair, dust and grit collect there and gradually stop the flap from seating properly. A wipe every few weeks is all it takes.\n\nTwice a year, check the screws and the hinges. Daily use works fixings loose over time, and a loose frame starts to rattle and wear. Tightening them takes two minutes.\n\nAvoid solvents and abrasive scourers on the ABS plastic. They cloud and scratch it. Mild soap and a soft cloth is the whole care routine.\n\nThe short version\n\nIf you are tired of opening the door all day, a screen pet door fixes it for not much money and not much effort. This one gives you a large 12 x 14 inch opening, a maker rating up to 80 pounds, a magnetic self-closing flap that keeps insects out, and locks on both faces so you stay in control.\n\nMeasure three things before you buy: your screen thickness (0.25 to 0.5 inches), your flat mesh area, and your dog's shoulders. Get those right and the rest is a ten minute job with a template and a blade.\n\nThen sit down and finish your dinner.", "llm_summary": "The Ownpets Dog Screen Door 12 x 14 is a pet flap that installs into an existing screen door panel. The inside opening measures 14 x 0.5 x 12 inches and the maker rates it for pets up to 80 pounds, suiting cats, small breeds and large dogs. The frame is ABS plastic with reinforced hinges and larger screws. A magnetic closure self-closes the flap after each pass to keep insects out, and locks on both the inside and outside faces control access. It fits metal, fiberglass and vinyl-coated screens from 0.25 to 0.5 inches thick and installs tool-free with an included alignment template, with no drilling required. Color is black. Product weight and country of origin are not specified in this record.", "returnable": true, "return_policy": "Voluntary 14-day change-of-mind returns in original condition, buyer pays return postage; state consumer protection law and implied warranties for faulty goods. Return postage on faulty goods is ours.", "shipping_profile": "standard", "warranty": null, "brand": "American Budget Screens", "gtin": null, "mpn": null, "condition": "new", "url": "https://americanbudgetscreens.com/dog-screen-door-12-x-14/", "canonical_url": "https://americanbudgetscreens.com/dog-screen-door-12-x-14/", "json_url": "https://americanbudgetscreens.com/api/products/dog-screen-door-12-x-14.json", "updated_at": "2026-10-09" }